Delta Exhaust Assembly Paste Tube & Repair Putty Tub
120g Tube of Delta Exhaust Assembly Paste and a 250g Tub of Delta Exhaust Repair Putty.
Lubricates and Seals joints
For use on all joints - manifold to silencer
For leak proof exhaust systems
Withstands extreme temperatures up to 1000 deg C
Eases joints into place
Gas Tight Seal
Directions for Use (Assembly Paste):
Remove all dirt, grease and loose rust etc.
Slightly roughen the two surfaces to be jointed with suitable abrasive.
Apply the paste liberally to all joints and assemble, removing any unnecessary excess.
Hardening is accelerated by heat from the exhaust system once the engine is running.
System is sealed once product is hardened.
All equipment can be cleaned with warm water and detergent.
Ensure tube is sealed after use.
Directions for Use (Repair Putty):
Ensure repair area is clean and free from loose rust.
Moisten repair area with water and apply with a knife.
Force putty into repair to give added strength, soften with water if required.
Replace lid firmly after use.
After putty has been applied start engine and allow idling for a few minutes.
Once hard the exhaust system is ready for normal use.